What type of foam
« on: March 02, 2016, 04:42:13 am »
First off the wiki is looking awesome! So much new stuff being added thank you!!

So I took a look at the foam that came inside the case of my revo, it's a tiny tiny piece of black stuff, quite dense, the large chunk shown in the wiki looks a lot less dense, where can I get or what sort of foam is the "right" sort of foam from for the baro?

F450 Clone
EMax 2313 with generic 10x4.5 carbon fiber prop
DYS XM20A BLHeli mini 20A ESC
Revo with OPLink mini
3S 3300 nano-tech
Taranis XD9 Plus TX with X4R-SB RX

Re: What type of foam
« Reply #1 on: March 02, 2016, 08:51:14 pm »
You want "open cell foam", and you want the right amount of it.  A small amount of air can pass through it.
If you use too thin a piece, it passes too much air, as if it isn't even there.
If you use too thick a piece or compress it too much it blocks the air flow too much.