[mogren3000]

Hi.
I cant upgrade my CC3D firmware with LibrePilot. Getting timed out and a message that tells me to use the uploader plugin.
So I found that if I use the Firmware-tab I should make it work but i get the same error.

Added a picture of the error message. My board is blinking blue and the green LED is not blinking, its constant green.
I am running windows 10 if that helps to solve the problem

Any ideas?

[f5soh]

Hi,
Welcome.

If timeout maybe your board have a v3 bootloader.

Try update bootloader first:
https://librepilot.atlassian.net/wiki/display/LPDOC/Firmware+Tab

or

- Disconnect the board from USB.
- Click Upgrade & Erase button
- Connect the board to automatically install firmware and erase flash.
- Disconnect / Reconnect for reboot if fails to reboot automatically.

[mchiodo]

I had the same thing happen.  I just tried again and it worked fine on the second try

[mogren3000]

Now I have the latest firmware on the board and have updated the bootloader. But when i want to run the Wizard I have the problem that I cant click next when doing the board identification.

I have added a picture.

[f5soh]

Looks like your board is not running, there is no Rx data displayed on bottom.

How it works while you power the board ? Fast blinking at some point ?

[mogren3000]

There is fast blinking when I connect the CC3D with LibrePilot. Then I only have one green dot for the TX. Then where you can see all the stats for the board. Flight Time and so. There is says "Log Replay", added image.

[f5soh]

- Try Rescue button
- Connect board

Witch Bootloader version ?

If BL v4, try again with Upgrade&Erase and be sure you wait for Erase.

[mogren3000]

So. Now i get "Time out while booting. Press OK to finish, you will have to manually upgrade the board".

Really want it to work.

[f5soh]

This should not append with this method:

- Disconnect board first
- Rescue button or Upgrade&Erase
- Connect board

[mogren3000]

This should not append with this method:

- Disconnect board first
- Rescue button or Upgrade&Erase
- Connect board

I have done this and nothing changes. When doing the Upgrade&Erase right before the rebooting the computer looses the connection with the USB, that it cant be recognised. Can this be the problem?

[f5soh]

Are you sure the bootloader is v4 ?

Connecting board after click on button ?

[mogren3000]

Are you sure the bootloader is v4 ?

Connecting board after click on button ?

Yes the bootloader is v4 and I am clicking the button before i connect the board.
Added a image for some information from the Rescue

[f5soh]

Maybe a windows issue, try another PC if you can.

Try also this: https://forum.librepilot.org/index.php?topic=216.msg1437#msg1437

[mogren3000]

Maybe a windows issue, try another PC if you can.

Try also this: https://forum.librepilot.org/index.php?topic=216.msg1437#msg1437

Great. This saved the day. Now its working. Thanks alot.

[f5soh]

Driver issue ?