Can not select helicopter
« on: April 19, 2018, 04:33:47 am »
Hi, i had a CC3D board around some time for testing and learning and try set up a heli with CC3D. I have now downloaded and installed latest Librepilot software and connected CC3D board with usb, and the board light up with a blue and orange light. So i started the setup wizard, and it wanted to update so i did that. So i selected Sbus, the normal esc and when i come to wehicle selection helicpter is not a option, its greyed out. Could any firmvare update fix this?


BA

karla

  • ****
  • 444
Re: Can not select helicopter
« Reply #1 on: April 19, 2018, 06:41:40 am »
There is no Wizard for Helis now. No firmware update will fix it for you.
There are several configuration files from users here that you can upload to your board.
That will give you a start configuration to adjust.
Have a look here - https://forum.librepilot.org/index.php?topic=557.msg3990#msg3990
/Karl

utoedter

  • ***
  • 131
    • Frickeln und mehr
Re: Can not select helicopter
« Reply #2 on: April 19, 2018, 08:52:59 am »
Look at the librepilot Wiki, the heli setup is described there.


Gesendet von iPhone mit Tapatalk Pro