trust

  • *
  • 16
PID parms don't save
« on: January 28, 2018, 09:03:39 pm »
I can upload and download my PID parameters fine, but even though I press the check button and it says parameters have been saved, once I power down and repower the system the parameters revert to the original values.
?

Re: PID parms don't save
« Reply #1 on: January 28, 2018, 09:39:46 pm »
Do you have TxPID or similar enabled?  So that it is getting the setting from that?

trust

  • *
  • 16
Re: PID parms don't save
« Reply #2 on: January 28, 2018, 09:51:32 pm »
No. I just use the PID tuning tab, adjust parameters, hit the upload button, then the check box save button.

Re: PID parms don't save
« Reply #3 on: January 28, 2018, 10:43:17 pm »
Are you using LibrePilot GCS?  That doesn't sound like it.  PIDs are adjusted on the Stabilization tab and there is only one button to push called Save.

Or are you using the System page Stabilization tab; in which case you must click the "red up arrow" at the top of the screen to permanently save.