tinou

  • **
  • 83
Projet Quad90
« on: January 13, 2018, 07:05:07 pm »
Hello.
In France it's the winter so i don't have lot of motivation for drive my S500.
So i have a stupid idear lol. Buid a mini quad90 for pratic in my home.
Do you have a set up propositions for this?
I have see a "box" with flight controler, osd and power board distribution are stake but it's always for configure with inav or betaflight.
Do you know if something exist with a cc3d or another small boards who can configur with librepilot?
Thanks for your futur answer

Re: Projet Quad90
« Reply #1 on: January 14, 2018, 08:28:04 am »
Unreleased "next" version may work with that controller, else you might be able to fit an Atom or Nano controller.

tinou

  • **
  • 83
Re: Projet Quad90
« Reply #2 on: January 14, 2018, 10:07:36 am »
Ok so i will install Next.
The name of this it's "flytower".
I will search for this.
Someone have build this setup?
Can a have retex? (Return of experience)
Tks

Mateusz

  • *
  • 808
Re: Projet Quad90
« Reply #3 on: January 14, 2018, 12:05:08 pm »
Hi,

Development branch in git repository contains few interesting targets F4 for example
Code: [Select]
git clone https://bitbucket.org/librepilot/librepilot.git
cd librepilot
git remote add mindnever https://bitbucket.org/mindnever/librepilot.git
git fetch mindever
git checkout remotes/vlad/omnibus_f3_f4

I am flying two stacks: Emax F3 Magnum and HGLRC F4 XJB F428 Tower.

See attached pictures. The F4 build is running LibrePilot from the mentioned branch. The F3 build I will switch to LibrePilot soon, to test new code mindnever pushed.
I really recommend HGLRC F4 tower with new BLheli32 ESC (currently out of stock on BG). With Emax one I had some problems, it does not do claimed DShot600 and has some wired behaviour.
I do recommend 1106 motors from Emax though. They're very  well made. I use 4500kv version to run 3S but you might consider 7500kv (out of stock on BG),  to run on 2S. Also Gemfan 3 blade 2040 props with two holes for mounting them I would recommend.

« Last Edit: January 15, 2018, 08:11:24 am by Mateusz »

tinou

  • **
  • 83
Re: Projet Quad90
« Reply #4 on: January 14, 2018, 10:07:58 pm »
Tks for all!!

Mateusz

  • *
  • 808
Re: Projet Quad90
« Reply #5 on: January 15, 2018, 08:11:05 am »
You could try

Frsky XM+ Micro D16 SBUS Full Range Receiver
EMax RS1106 6000KV
GEPRC GEP HX2 Hummingbird 110mm
RunCam Micro Sparrow
Gemfan Hulkie 2040 2.0X4.0 PC 3-blade Propeller
HGLRC XJB F428 Flight Controller & ESC BLheli32 stack https://www.banggood.com/HGLRC-XJB-F440-TX20_V2-Omnibus-F4-Flight-Controller-OSD-40A-Blheli_32-3-5S-ESC-25100200350mW-VTX-p-1242937.html
Black Eachine Propeller Guard For Aurora 100

tinou

  • **
  • 83
Re: Projet Quad90
« Reply #6 on: January 16, 2018, 11:11:57 pm »
Cool thats what i need!
Aliexpresd will be happy tomorow morning