mauri64

  • *
  • 21
  • hy
Sparky2.0
« on: December 29, 2017, 10:47:13 am »
Salve a tutti, vorrei fare due domande, 1 come si fa a resettare la sparky2, cioè portarla vuota come se fosse nuova?
2 per flashare il firmware su sparky2 a prescindere da quale programma si usa, quale è la procedura? grazie

Re: Sparky2.0
« Reply #1 on: December 29, 2017, 07:18:28 pm »
Tramite Google translate
----------------------------
Dubito che tu voglia davvero tornare indietro nel modo in cui era quando nuovo ... Quando è nuovo, Sparky2 viene fornito con bootloader e firmware TauLabs. Dovresti installare TauLabs sul tuo PC, usarlo per far lampeggiare bootloader e firmware TauLabs. Forse usare CleanFlight / BetaFlight per installare il bootloader "file .hex". Dubito che tu voglia fare questo se vuoi usare LibrePilot e lo vuoi solo nel modo in cui è arrivato.

Diverse marche di firmware richiedono procedure diverse per far funzionare tutto.

Vuoi utilizzare LibrePilot con esso o tornare a TauLabs o qualcos'altro?

La seguente procedura funziona se Sparky2 ha bootloader TauLabs o bootloader LibrePilot su di esso. Non funzionerà se hai messo qualcos'altro come CleanFlight su di esso.

Per utilizzare LibrePilot:

Vai qui per scaricare bu_sparky2.opfw
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/5669026/Firmware+Tab#FirmwareTab-Rescuemethod

Vai qui per visualizzare il file di aggiornamento del bootloader che hai scaricato
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/5669250/Firmware+Rescue

Molto importante da avviare dopo aver installato il bootloader UPDATER e prima di installare il firmware. Lascia che funzioni per 30 secondi dopo l'avvio.

Vai qui per usare "Metodo manuale" per lampeggiare il firmware e impostare le impostazioni predefinite; fai "Aggiorna e cancella", non solo "Aggiorna"
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/5669026/Firmware+Tab#FirmwareTab-Manualmethod

Original English text
----------------------------
I doubt that you really want it all the way back to the way it was when new...  When new, Sparky2 comes with TauLabs bootloader and firmware on it.  You would need to install TauLabs on your PC, use it to flash TauLabs bootloader and firmware.  Maybe use CleanFlight/BetaFlight to install the bootloader ".hex file".  I doubt that you want to do this if you are going to use LibrePilot and you just want it back the way it came.

Different brands of firmware require different procedure to get it all working.

Do you want to use LibrePilot with it or go back to TauLabs or something else?

The following procedure works if the Sparky2 has TauLabs bootloader or LibrePilot bootloader on it.  It will not work if you have put something else like CleanFlight on it.

To use LibrePilot:

Go here to download bu_sparky2.opfw
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/5669026/Firmware+Tab#FirmwareTab-Rescuemethod

Go here to flash the bootloader updater file that you downloaded
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/5669250/Firmware+Rescue

Very important to boot after installing the bootloader UPDATER and before installing the firmware.  Let it run for 30 seconds after booting.

Go here to use "Manual method" to flash the firmware and set to default settings; do "Upgrade&Erase", not just "Upgrade"
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/5669026/Firmware+Tab#FirmwareTab-Manualmethod

mauri64

  • *
  • 21
  • hy
Re: Sparky2.0
« Reply #2 on: December 29, 2017, 09:40:46 pm »
il fatto è che nella sparky2.0 avevo cominciato a programmarla dopo aver messo il firmware da librepilot, però non sono riuscito a programmare tutto per farla funzionare, allora alcuni amici mi hanno detto di provare con betaflight, cleanflight e taublabs, ma molto provabilmente facendo tutte queste manovre ho peggiorato la situazione e non so come fare per avere la sparky2.0 funzionante RTF

Re: Sparky2.0
« Reply #3 on: December 30, 2017, 01:26:02 am »
Non hai ancora detto con certezza se la tua destinazione finale è LibrePilot ... :)

Inizia utilizzando BetaFlight Configurator per eseguire l'flash di questo bootloader bl_sparky2.hex, quindi riprendi le istruzioni precedenti facendo "Metodo manuale" / "Manual Method" per far lampeggiare il firmware.