« previous next »
Pages: [1]
*

little nellie

  • *
  • 5
dshot on a new built
« on: April 24, 2017, 02:11:32 am »
Hi, building a new quad, installed a set of DYS DSHOT ESC. During the ESC configuration in Libre Pilot, doesn't appear DSHOT is one of the option. Has anyone able to use the DSHOT with Revo? If yes, which selection did you choose? 

thanks for your time.
Logged
*

TheOtherCliff

  • *****
  • 4303
Re: dshot on a new built
« Reply #1 on: April 25, 2017, 08:20:04 am »
DSHOT is not available in 16.09.  Will your ESCs work with another protocol?  PWM50 to 500, OneShot42 or 125, MultiShot?
Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: dshot on a new built
« Reply #2 on: April 25, 2017, 07:01:19 pm »
Hi,

Currently the Dshot option is only available in a testing branch and will be merged to the 'next' branch soon.
https://bitbucket.org/librepilot/librepilot/pull-requests/410

This is a developer branch, feel free to test and report if works using the installer bellow :
https://drive.google.com/open?id=0B5d_9OcqQj8BcnRxWmxpUUJCR0U

Select the Dshot mode for banks used in Output tab, currently Dshot is not supported using the wizard.
Additionally you can change the frequency using the UAVOBrowser, search for DShotMode. (default 600)


Logged
*

little nellie

  • *
  • 5
Re: dshot on a new built
« Reply #3 on: April 26, 2017, 01:21:51 am »
Quote from: TheOtherCliff on April 25, 2017, 08:20:04 am
DSHOT is not available in 16.09.  Will your ESCs work with another protocol?  PWM50 to 500, OneShot42 or 125, MultiShot?

I have no idea..  DYS site shows...  Supports DShot600, DShot300 only.

Logged
*

little nellie

  • *
  • 5
Re: dshot on a new built
« Reply #4 on: April 26, 2017, 01:23:27 am »
@f5soh,

thanks..  will wait for the 'next' branch to contain this. Hope it is soon.
Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: dshot on a new built
« Reply #5 on: April 26, 2017, 02:34:58 am »
Why not test using the GCS installer link above ?

That's current Next + Dshot on it
Logged
*

mr_w

  • *
  • 207
    • LibrePilot
Re: dshot on a new built
« Reply #6 on: May 01, 2017, 12:56:01 pm »
dshot has been merged into next since yesterday.
Logged
*

little nellie

  • *
  • 5
Re: dshot on a new built
« Reply #7 on: May 02, 2017, 05:49:24 am »
Quote from: f5soh on April 26, 2017, 02:34:58 am
Why not test using the GCS installer link above ?

That's current Next + Dshot on it

I am using that currently..  other than unable to use the setup wizard as you stated, it works fine.  Thanks
Logged
*

kicekilla

  • *
  • 39
Re: dshot on a new built
« Reply #8 on: May 08, 2017, 04:38:06 am »
I personally never use the wizard... although I started with openpilot before the wizard was a thing so..

with that said, everything the wizard does can be done through the configuration tabs.

You can even go through the wizard, skip the esc stuff, and just do that portion from the output tab in configuration. just a thought.

Quote from: little nellie on May 02, 2017, 05:49:24 am
Quote from: f5soh on April 26, 2017, 02:34:58 am
Why not test using the GCS installer link above ?

That's current Next + Dshot on it

I am using that currently..  other than unable to use the setup wizard as you stated, it works fine.  Thanks
Logged
*

little nellie

  • *
  • 5
Re: dshot on a new built
« Reply #9 on: May 10, 2017, 09:34:44 pm »
I was able to config without the wizard.

Logged
*

kicekilla

  • *
  • 39
Re: dshot on a new built
« Reply #10 on: May 11, 2017, 04:03:03 am »
glad to hear it!
Logged
*

p25o1

  • *
  • 8
Re: dshot on a new built
« Reply #11 on: May 26, 2017, 09:17:33 pm »
is the latest compiled NEXT available on bitbucket ?
Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: dshot on a new built
« Reply #12 on: May 27, 2017, 01:10:37 am »
Logged
*

Xviews

  • **
  • 51
Re: dshot on a new built
« Reply #13 on: May 29, 2017, 07:24:40 am »
@little nellie DShot testen and works?
Logged
Pages: [1]
« previous next »