Endpoints correct?
« on: April 09, 2017, 06:34:53 pm »
I've been told endpoints should be 1000 to 2000 but these are mine after completing the vehicle wizard. Flies fine. Are they OK like this?

Thanks!

Re: Endpoints correct?
« Reply #1 on: April 10, 2017, 06:11:32 pm »
Anything that is detected automatically (and works ;) ) is fine.  That timing looks exactly like my FrSky Taranis SBus setup.

Expect 1000 to 2000 for PWM / PPM setups.  Also normal mode ESCs use 1000 to 2000, but 1000 to 1900 will get you all the way up to the 500Hz used in PWMSync.

Re: Endpoints correct?
« Reply #2 on: April 10, 2017, 08:34:01 pm »
Thank you very much.