Hi,
Here is my setup:
Transmitter: Turnigy 9x (stock firmware)
Receiver: Frsky d8r-II plus
This how my cc3d is wired with the receiver:
Black/red/white Ch 1
blue Ch 2
Yellow Ch 3
Green Ch 4
[empty] Ch 5
Yellow Ch 6
Black Ch 7
I ran the transmitter wizard setup and throttle/yaw/pitch/roll and 3 flight mode switch are detected and working perfectly! Transmitter wizard setup dont detect any other auxiliar channel. I tried assign it manualy but also didnt work.
In my transmitter i assigned Gear switch to all channels (one by one) librepilot never detected any auxiliar channel again.
I want arm my motors with a auxiliar channel and i want to setup a buzzer switch to turn it on if i lose my model.
[Please dont post links with buzzer setup tuturial, i already know how to do it, but i cant do anything because my aux channels not working, or youtube videos i already saw all of them]
If some expert read this and know whats going on please Help me! Im pulling my hair out.
Thank you