srd Y3, sending me mad
« on: August 27, 2016, 07:44:50 pm »
hello all,
diving my head into a wood chipper, I decided to purchase a SRD Y3/ BNF.
At first it would not bind and there was an issue with the receiver board. The receiver board duly replaced it now doth bind. Issue is now after innumerable passes through the vehicle and radio setup wizards we are now going backwards. After correcting a multitude of wrongly assigned channels I finally was able to arm the motors but noticed the servo on the tail motor for the Yaw did not move at all. So I decided to plunge my head further into that wood chipper and try another pass through the weezards. Now no arming, no servo, my head hurts and theres a suspicious Y3 shaped hole in the window.