First of all, thank you for taking time to look at this. I am very knew to the hobby. I've been lurking these forums watching tons of youtube and educating in the manuals for a couple months. While I'm getting pretty decent at los and fpv; I now started preparing for tinkering with some of the automated flight options and here is where this issue begins.
I have a mini/op gps which I had working on my rev. This did not auto-configure so I followed the LP manual setting it up with u-center. All was fine bench testing / no flight time yet). However, when I configured oplink during one of the reboots I noticed gps didn't reconnect.
Here is what i've ruled out:
1. GPS - verified working (reconfigured with u-center and tested on cc3d atom)
2. Hardware - verified working (I moved the gps to FP from MP; I verified flexi to be working w/ telemetry to miniomosd)
3. Software/OS - not sure / seems okay (I erased / re-flashed LP, everything else seems to be working except gps link).
Anyone every run into anything like this? Does LP / GC have any debugging tools I can use to trouble shoot the gps connectivity issue? I visually diffed the HW settings between the atom and rev thinking perhaps the gps is faulting and the atom has lower thresholds but they seem mirrored.
Any suggestions or input would be appreciated.