Will I be okay with a slight tilt on my GPS stand?
« on: April 05, 2016, 07:58:09 pm »
The GPS I got came with a mount with two holes, but they didn't line up with my frame at all. I had to screw in one screw on the back of my quad, then I zip-tied it to an adjacent hole(I tried zip-tying both sides, but it doesn't work out). It doesn't turn or wobble so that's good, but because of the zip-tie, the whole stand is tilted about 15 degrees to the left. Will I be able to just go into GCS and set the roll axis of the auxmag 15 degrees?

The GPS I bought doesn't have a mag(just compass) so I ordered a new GPS. That means I can't test it out at the moment.

But will I be able to do what I think I should do?

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Will I be okay with a slight tilt on my GPS stand?
« Reply #1 on: April 05, 2016, 08:19:09 pm »
Next you can easily compensate the angle for Mag using auxMag board rotation.

 

Re: Will I be okay with a slight tilt on my GPS stand?
« Reply #2 on: April 05, 2016, 08:39:54 pm »
That's all I needed to know, thank you!