« previous next »
Pages: [1]
*

gazza95

  • *
  • 5
CC3D Config Error displayed in Firmware Tab
« on: March 09, 2016, 09:16:38 am »
Hi

I'm trying to replace OpenPilot 15.02 on a CC3D with LibrePilot 15.09 and am getting CONFIG and ? showing on the Firmware tab. This indicates that a GPS mode has been selected and CC3D obviously has not GPS. The help info is suggesting I have selected a Flight Mode that requires GPS. Attached is current Flight Mode settings.

The receiver is a FrSky X4SB and connected via S-Bus.


Any help would be welcome before I reinstall OpenPilot........


Gary
« Last Edit: March 09, 2016, 11:45:03 am by gazza95 »
Logged
*

gazza95

  • *
  • 5
Re: CC3D Config Error displayed in Firmware Tab
« Reply #1 on: March 09, 2016, 12:21:03 pm »
Seems to be fixed after Update with Reset. Have reentered all previous parameters and seems to be working, just need to fly it to check.

Gary
Logged
Pages: [1]
« previous next »