[funtimegrandpa]

Hello,  I am using the Eachine 250 modified with Little Bee ESC's and a Revolution.    Things are working well but I wanted to know if there is a way to make tighter Rolls?  I dont understand some of the settings and figured I should ask before tinkering.   Any help would be very much appreciated. 

Thanks again,    Grandpa jake

[NicholasDavid]

Higher rate mode response and max rate limit. The higher the degree per second rotation the faster it flips or rolls. I'm flying with about 550*/second. Which seems plenty fast for now. I started with around 450-480 and it's fast but not fast enough. The mid 500 range seems about perfect

[funtimegrandpa]

This is what I have,  what should I change

[NicholasDavid]

The rate slider. The middle one at the top. Change it from 450 to say 500. Then try 550 if that's not fast enough.

[funtimegrandpa]

Thanks I will give that a try

[ernstock]

This is what I have,  what should I change

Wow !
Flying in rate mode at 450* sec with no expo , and it's too slow to roll ?
Or ,  are you flying in attitude mode grandpa jake ?
Regards
Grandpa Ern.

[f5soh]

Like NicolasDavid says in first post, be sure the rate value you set is not limited by the Max Rate Limit value.

https://librepilot.atlassian.net/wiki/display/LPDOC/Rate+Setup#RateSetup-Advancedtab

[NicholasDavid]

My current rates on my 3s "X" copter are 550 pitch and roll rate and 600 max rate limit. 70 expo on roll and pitch 20 on yaw at 400*