I'm using my old Futaba T7C heli radio at the moment and wanted to use the TH as arming swithch for the board.
It has the standard Throttle Hold switch, which lowers the throttle channel (ch 3) to a very low output and holds it there regardless of throttle stick input.
Now, if I assign Accessory0 to Chan 3 and lower the Neutral to a proper setting I can arm and dissarm the board with it using Accessory0 as trigger.
The problem is that I don't get proper Thottle output anymore. It has very limited range and behaves rather odd.
I'm I doing something fundamentaly wrong or is this "by design" in any way?
I'm using OneShot125 as output to ESCs if that has any relevance.
Of course, I could just bind another channel to that switch (ch 7 for example) and I would get the proper function but then again I wouldn't solve this problem and it itches.