Configuration error
« on: May 25, 2016, 07:59:12 am »
Hello,
Have problem on my T-REX 50 with Revo.

Servo motion good.
Hovering in Pitch/Roll Rate and Axislock and Attitude good.
Also Manual, Attitude vario, Attitude hold in Thrust are good.

But when I set GPS assist in [Assisted control], the [CONFIG] on fligth data tab go's red.
Here is my UAV, and I cannot find what is wrong, please someone help.


f5soh

  • *****
  • 4572
    • LibrePilot
Re: Configuration error
« Reply #1 on: May 25, 2016, 11:00:01 am »
GPSAssist is only supported by multirotors.

You should use VelocityRoam
https://librepilot.atlassian.net/wiki/display/LPDOC/GPS+Flight+modes#GPSFlightmodes-VelocityRoam

Re: Configuration error
« Reply #2 on: May 26, 2016, 03:04:17 am »
Thank's !
I'll try it.