LibrePilot Forum

Users => Vehicles - Helicopters => Topic started by: Yoshi1951 on May 25, 2016, 07:59:12 am

Title: Configuration error
Post by: Yoshi1951 on May 25, 2016, 07:59:12 am

Hello,
Have problem on my T-REX 50 with Revo.

Servo motion good.
Hovering in Pitch/Roll Rate and Axislock and Attitude good.
Also Manual, Attitude vario, Attitude hold in Thrust are good.

But when I set GPS assist in [Assisted control], the [CONFIG] on fligth data tab go's red.
Here is my UAV, and I cannot find what is wrong, please someone help.

Title: Re: Configuration error
Post by: f5soh on May 25, 2016, 11:00:01 am

GPSAssist is only supported by multirotors.

You should use VelocityRoam
https://librepilot.atlassian.net/wiki/display/LPDOC/GPS+Flight+modes#GPSFlightmodes-VelocityRoam

Title: Re: Configuration error
Post by: Yoshi1951 on May 26, 2016, 03:04:17 am

Thank's !
I'll try it.