[exadra]

Dear all,

I´m new in the drones world and I´m trying to build my own drone from marts from Ebay!!
I already have the full quadcopter build, just missing the RC control.
In my drone I have a radio ling between the cc3D controller and the LibrePilot software and followed the tutorial to use a joystick connected to my PC to control the drone.
The joystick is connected to the LibrePilot software, the software responds to the joystick, all commands in the config of the drone are set to none, but I cannot arm it!!

Can somewone help me?

Thanks in advance
.Pedro

[f5soh]

Hi, welcome.

Maybe something not related to joystick that prevent arming...
Please post your config file: File > Export UAV Settings.

[Phatpolarbear]

Hi Pedro,

What reciever are you using?

I had an issue with my Radiolink AT9 transmitter arming my drone (I use a cc3d flight controller).

When in the transmitter  page of Librepilot you need to go to the right tab (arming) and set the time and stick command. I found this worked for me.

Sorry my response isn't great as I'm very new to drones too.