RISE rxs270 help
« on: July 23, 2017, 06:58:00 am »
 I have recently obtained a  Rise rxs270 and was wondering if anyone had a configuration file for the factory settings. Maybe just a decent configuration that will work well. I almost have no idea what I am doing and did not realize it was preprogrammed from the factory. any help would be awesome, thanks

f5soh

  • *****
  • 4572
    • LibrePilot
Re: RISE rxs270 help
« Reply #1 on: July 23, 2017, 07:30:37 pm »
Hi,

According to the previous config file (15.09 release) published in Hobbico website http://downloads.hobbico.com/software/ris/rxs270-stock.zip
Here is the config file for 16.09 release (attached file)

You can also import the template attached that allow restoring the main stabilization settings.
https://librepilot.atlassian.net/wiki/pages/viewpage.action?pageId=63668239#Import/Exportvehicletemplate-Importtemplate

I recommend redo the transmitter wizard or at least a Manual calibration if all stick assignments looks fine.

« Last Edit: July 23, 2017, 08:22:06 pm by f5soh »

Re: RISE rxs270 help
« Reply #2 on: July 25, 2017, 02:17:20 am »
Thanks a lot! Setup worked this time, now I just need a test flight. Appreciate the help.