vehicle setup wizard
« on: February 21, 2017, 07:51:36 am »
Hi
I have used librepilot a few times and am really impressed, but yesterday when I had just finished working on a drone and flew it a little and noticed that the motor that I had replaced needed a little tuning. I did the vehicle setup wizard and for no apparent reason may drone doesn't fly at all. My receiver doesn't isn't turning on for some reason. I immediately thought that I had accidentally chosen PPM but checked and it is on PWM which is how I've wired my receiver. Has anyone had the same problem?

Re: vehicle setup wizard
« Reply #1 on: February 23, 2017, 04:21:26 am »
fixed already (I just had to do the vehicle wizard setup then bind my controller to the receiver and then do the transmitter setup wizard). I didn't
think that you have to rebind your transmitter if you erase all settings.