« previous next »
Pages: [1]
*

Rood_Dragon

  • *
  • 22
Overvoltage to flight controller
« on: February 11, 2018, 02:11:07 pm »
Is the flight controller ruined if 14.7 volts were inadvertly applied to pin 1 and 2? It does not power up after the event. Can I replace a component and be ok

Sent from my SM-N950U using Tapatalk

Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Overvoltage to flight controller
« Reply #1 on: February 11, 2018, 02:20:21 pm »
With 14.7V there is something burned, for sure.
If you are lucky can be the 3.3V regulator acting like a fuse but also the CPU.

Schematics and assembly can be found here.
Logged
Pages: [1]
« previous next »