LibrePilot Forum

Users => Vehicles - Helicopters => Topic started by: Rood_Dragon on February 11, 2018, 02:11:07 pm

Title: Overvoltage to flight controller
Post by: Rood_Dragon on February 11, 2018, 02:11:07 pm

Is the flight controller ruined if 14.7 volts were inadvertly applied to pin 1 and 2? It does not power up after the event. Can I replace a component and be ok

Sent from my SM-N950U using Tapatalk

Title: Re: Overvoltage to flight controller
Post by: f5soh on February 11, 2018, 02:20:21 pm

With 14.7V there is something burned, for sure.
If you are lucky can be the 3.3V regulator acting like a fuse but also the CPU.

Schematics and assembly can be found here (https://github.com/librepilot/LibrePilot/tree/next/hardware/Production).