The GPS I got came with a mount with two holes, but they didn't line up with my frame at all. I had to screw in one screw on the back of my quad, then I zip-tied it to an adjacent hole(I tried zip-tying both sides, but it doesn't work out). It doesn't turn or wobble so that's good, but because of the zip-tie, the whole stand is tilted about 15 degrees to the left. Will I be able to just go into GCS and set the roll axis of the auxmag 15 degrees?
The GPS I bought doesn't have a mag(just compass) so I ordered a new GPS. That means I can't test it out at the moment.
But will I be able to do what I think I should do?