Hi, first sorry for my english translated by Google;).
I have a "revo banggood" micro OSD and I Oplink flights.
My problem:
When I lose the links with Oplink revo, telemetry data is not transmisse the OSD.
Information is frozen on the screen with a message "No Tele Data"
As soon as I find a connection between Oplink and revo, the Telemetry working again.
The tests were done during the failsafe settings (there are no casualties except my bed lol).
My first test:
Procedure:
1/ I starts the revo but not Oplink. => Telemetry data is ok
2/ I start the Oplink. The connection between Revo and Oplink is established => telemetry data is ok
3/ I cut the Oplink, so the link between Oplink and revo is disabled => telemetry data is stop and "NO TELE DATA" in my glasses fpv
4 / I restart Oplink. The links between Revo and Oplink is ok. => Telemetry data is ok
My second test:
Procedure:
1/ I starts Oplink but not Revo. => Telemetry data is no ok (it's normal
)
2/ I start the Revo. The connection between Revo and Oplink is established => telemetry data is ok
3/ I cut the Oplink, so the link between Oplink and revo is disabled => telemetry data is stop and "NO TELE DATA" in my glasses fpv
4 / I restart Oplink. The links between Revo and Oplink is ok. => Telemetry data is ok
the problem seems to be that in the case of use of Oplink.
I have a nano with the same micro osd but I use a receiver FrSky DR8XP but not Oplink. During failsafe test, I do not have a loss of telemetry data.
Regards