Paul-H

  • *
  • 8
CC3D in a plane what stabilisation modes are best
« on: March 05, 2016, 07:13:24 pm »
Hi all

I have a CC3D board that I want to try in an Aeroplane for flight stabilization but need a little help

Its all connected and working but I cannot figure which Stabilization modes to use

With a normal plane flight controllers its common to use a 3 position switch and hand use that for off, gentle stab and full stab

With the CC3D I have manual for the first position but what about for the other two, I was thinking weak levelling for P2 and Attitude with max bank set to 45deg for P3 does that sound like a plane or is there  a better option.

Thanks for any help

Paul

f5soh

  • *****
  • 4572
    • LibrePilot
Re: CC3D in a plane what stabilisation modes are best
« Reply #1 on: March 05, 2016, 07:21:20 pm »
I prefer this settings:
- Attitude
- Rattitude
- Rate or Acro+

You can also consider the "Manual" mode that mean the board act like a pass through.