• *
  • 1
PPM frame pulse
« on: February 22, 2016, 08:56:50 am »
I use ULRS as my receiver.
Before librepilot, I used openpilot with my CC3D and it work fine. Now I use librepilot and it can't get the ULRS PPM signal.
I ask the author of ULRS, he said that PPM frame pulse of librepilot is too short. With ULRS it's 3 ms.
I'm not sure that, could you please check that?


  • *****
  • 4572
    • LibrePilot
Re: PPM frame pulse
« Reply #1 on: February 22, 2016, 12:59:45 pm »
Hi, welcome.

Double check which input you set in Hardware tab and select the right pin in receiver port according to Oneshot or not.

Take a look here: