Issues with micro minimosd
« on: February 05, 2016, 08:53:29 pm »
Hi all i need a little help.
When i try to flash the micro minimosd with the config tool it says error opening com port, what am i missing?

f5soh

  • *****
  • 4503
    • LibrePilot
Re: Issues with micro minimosd
« Reply #1 on: February 05, 2016, 08:56:27 pm »
Hi,

Select the right port, connect the DTR pin ?

Re: Issues with micro minimosd
« Reply #2 on: February 05, 2016, 09:23:03 pm »
it makes me select only one port (com1) even if the micro minimosd is unplugged. The dtr is plugged in.

f5soh

  • *****
  • 4503
    • LibrePilot
Re: Issues with micro minimosd
« Reply #3 on: February 05, 2016, 09:33:50 pm »
Which method do you use ?

ftdi or board/comBridge ?

Re: Issues with micro minimosd
« Reply #4 on: February 05, 2016, 09:53:50 pm »
FTDI

Thanks for your help.

Re: Issues with micro minimosd
« Reply #5 on: February 05, 2016, 10:07:34 pm »
Solved, I'm sorry, I had a broken pin on the usb cable just changed the cable and it works.

Thank you very much for your help.

f5soh

  • *****
  • 4503
    • LibrePilot
Re: Issues with micro minimosd
« Reply #6 on: February 05, 2016, 10:12:02 pm »
Put this cable to trash :D

Re: Issues with micro minimosd
« Reply #7 on: February 06, 2016, 12:00:21 am »
Ye that's for sure, after 3 hours spent in looking for what could be the problem, the trash is the only place possible for that cable.