[St4nglife]

Every time I plug my revo into my computer I get a "stack critical" alarm.  Does anyone know what could be causing this/how to fix it? 

[1morehobby]

Have you tried another computer.

[St4nglife]

No I only have one computer but I don't think the computer is the issue because it's never done this before and it only does it when I try to use oplink.

[Sid]

I would check solder joints. Hopefully you have another Uplink to try.

[f5soh]

Maybe a hardware issue.

Try to look into SystemStats and TaskInfo for details and locate witch module cause this alarm ?

[St4nglife]

here are screenshots of what you requested.

[TheOtherCliff]

System Stack seems to be the problem.

Are you running LibrePilot 15.09?  If not, I would suggest upgrading to it.

If you are already running 15.09, then what about your setup do you think is even a little out of the ordinary?

You could export your uav file (so you can go back to it later), erase settings, and start over, and watch for what it is that you enable that causes the System Stack to be so small.

[St4nglife]

I am using 15.09 and  absolutely nothing out of the ordinary as this is my first quad.

[TheOtherCliff]

Sorry.  Been away from forum for a week.  Did you get this working?

If not, I suggest the following:
- Export UAV settings to a file and post that file here.  I have a spare Revo I can import your settings and check if I get same System Stack size issue.  If I get stack size issue, I can remove settings one at a time and see what causes it.  It is probably something that is not tested much, like a different RC receiver type or something.
- Now that you have your settings saved into a file and can import them to get them back, you could try erase settings and check stack after that, run setup wizard again and check stack after that.

[f5soh]

Another user got the same error but strangely i can't reproduce the stack issue here using the same config steps or config file.

Look this post: https://forum.librepilot.org/index.php?topic=708.msg5170#msg5170
Firmware is a rel15.09 with increased memory size allocated for system module.

[St4nglife]

Well I've been extremely busy at college and haven't had time to mess with lately.  Today I finally had time and I plugged it in and the error was gone!  Im about to go fly it so we'll see if it somehow returns.