chartel

  • *
  • 10
Re: fw_coptercontrol_ibus14ch question
« Reply #15 on: February 04, 2020, 02:05:40 pm »
thank you cliff
I'll try it, then I leave feedback

chartel

  • *
  • 10
Re: fw_coptercontrol_ibus14ch question
« Reply #16 on: February 06, 2020, 02:37:51 pm »
YES, IT WORKED, thank you very much.
on my osd I have the rssi level always at zero, BUT on the RC Input Tab on the accessory RSSI is working,
as I move away the signal strength goes down.
Now I have to open the drone to connect the FTDI adapter and see what is wrong with the configuration of the minimosd micro.
I have the minimosd micro connected to the main port with the MSP option,
I'm using the firmware "LP_All_From_Revo170818.hex" and the software I use is MWOSD, so far I think everything is fine,
must be something that I did wrong in the settings of the micro minimosd.
thanks :)
« Last Edit: February 06, 2020, 07:19:56 pm by chartel »

Re: fw_coptercontrol_ibus14ch question
« Reply #17 on: February 06, 2020, 08:35:03 pm »
It only took me a few minutes to select the version and compile the code.  @f5soh did the research and wrote the code change.