I can't get to take off any help
« on: November 11, 2018, 12:07:44 am »
I have build zmr250 with cc3d  open pilot board,5" propellers kv2205 22300 motors 12amph bl helis escs I can't get to take off any help

Re: I can't get to take off any help
« Reply #1 on: November 11, 2018, 06:46:25 pm »
A little more info is needed for help.

What does it do?
 - no power to lift up
 - instant flip
 - are you running a lipo alarm so you know your (maybe worn out) battery is not sagging?
 - how many cells is your battery?
 - how many blades on each prop?
 - is the CC3D rotated from normal installation?  Normally, the arrow points forward, and the ESC connectors are on the right side.
 - what is your experience level
 - you said "kv2205 22300 motors" and I suspect that it is really "size 2205 - kv2300 motors"

With answers to these questions and especially with a video of what happens, including throttle stick, we might be able to help.  :)

Re: I can't get to take off any help
« Reply #2 on: November 15, 2018, 08:02:17 pm »
It doesn't doing anything keep on spinning in same place i'm trying to apload a video they telling the video is too large
I don't what I can do to apload a video

Re: I can't get to take off any help
« Reply #3 on: November 16, 2018, 07:07:15 am »
Upload it to youtube.com or vimeo.com and post the link here.

In the mean time, answers to the questions already asked are needed.  No one here is paid.  Help needs communication.