• *
  • 16
Need help with CC3D
« on: December 08, 2017, 12:18:13 pm »
Hi there  :)
Today I installed my cc3d on my plane everything works fine but my rudder and elevator are opposite to what it should be.
When I tilt my plane forward then my elevator goes down and vice versa.

Same for rudder.
But airleons are in right directions.

Need help.

Here is the video


  • *****
  • 4572
    • LibrePilot
Re: Need help with CC3D
« Reply #1 on: December 08, 2017, 09:18:55 pm »
Hi, welcome.

You will need to reverse outputs for rudder and elevator in Config > Output tab

Seems you have a big moving part for elevator :)
Moving part is usually around 25%/30% of chord.