utoedter

  • ***
  • 170
    • Frickeln und mehr
Re: 250mm Revo with GPS - is this a lost cause ?
« Reply #15 on: May 15, 2017, 09:11:28 pm »
I used, this aux mag sensor : https://www.aliexpress.com/item/GY-282-HMC5983-Replace-HMC5883L-High-precision-High-sensitivity-Temperature-Compensation-Triaxial-Compass-IIC-SPI-Module/32333887264.html?spm=2114.13010708.0.0.K7EBD9
In my opinion, is better than the stoc HMC5883L but with the expense of a port (flexi - ic2).
Maybe you could give it  a try if you already bought the gps without mag chip.

Does that work without pull up resistors? Just solder the cables and plug it into the Flexi-Port?

Re: 250mm Revo with GPS - is this a lost cause ?
« Reply #16 on: May 15, 2017, 10:56:36 pm »
Hi, yes it works without any help, I saw the discussion about that, and I look closer to the PCB of the mag sensor, and I saw 2 resistors from +Vreg(3,3V) to the SDL and SCL.
« Last Edit: May 15, 2017, 11:28:06 pm by octavvian »

Re: 250mm Revo with GPS - is this a lost cause ?
« Reply #17 on: May 15, 2017, 11:29:04 pm »
Hi, yes it works without any help, I saw the discussion about that, and I look closer to the PCB of the mag sensor, and I saw 2 resistors from +Vreg(3,3V) to the SDL and SCL.
A better image ;)
2 resistors 4,7kohm (472 smd in the picture)