Re: CC3D Lock out
« Reply #15 on: April 21, 2017, 03:49:23 am »
The Other Cliff,

Thanks for the suggestions.  Nothing seems to work.  I don't think it's ever connected.  I'm working on a MAC and maybe that's an issue, but I have tried every sequence and button twice and nothing connects to this board.  Board was working perfectly before a dicked with it.  Now it's hopeless.  Thanks for the suggestions,

Drew

Re: CC3D Lock out
« Reply #16 on: April 21, 2017, 04:44:47 am »
Have you tried manual rescue where you press rescue and then plug in the USB?

That is required for what I was suggesting (safe mode, etc).

If all you get is LED slowly fading in and out, you may not have firmware, just a boot loader and again you need to start with it unplugged, and press "upgrade and erase", then plug it in.  If that doesn't work, you either need a bootloader or you have a cable or PC problem.
« Last Edit: April 21, 2017, 04:47:57 am by TheOtherCliff »

Re: CC3D Lock out
« Reply #17 on: April 21, 2017, 05:47:28 am »
Got it.  Ended up going to beta flight

solved my problem
Thanks to everyone