Re: Mini GPS for Revolution and CCD3
« Reply #15 on: December 19, 2015, 06:39:55 am »
Mine did the same. 9600 sending NEMA. LP does not support NEMA anymore though.

hwh

  • *
  • 1018
Re: Mini GPS for Revolution and CCD3
« Reply #16 on: December 19, 2015, 07:12:38 am »
NMEA is supported on the revo series.  The cc3d doesn't have enough memory to support it.

Re: Mini GPS for Revolution and CCD3
« Reply #17 on: December 19, 2015, 06:40:43 pm »
Yeah, that is why I asked.  NMEA isn't supported on CC3D, so this GPS isn't going to work on CC3D without you building, testing, and slimming down a version of CC3D that has NMEA support.

jcg1541

  • **
  • 98
    • Phones, Networks, And The Red Pill
Re: Mini GPS for Revolution and CCD3
« Reply #18 on: June 25, 2017, 02:28:45 am »
Same with my mini OP GPS with Revo. 7 satellites locked, this video,

.
The heli is a 120 sized wltoys v977. The mini GPS is 5.4 grams including the wires.
This is my prototype for the MQTT protocol to replace the UAVTalk protocol. The heli
does not actually need to fly for the development. But the heli could lift off to the eye
level before adding the 5.4 grams GPS. Maybe I will try to fly it another day to see if
can still fly. So far , now,  it is 15.5 grams over its stock weight. Original product weighed
about 60 grams at take off. Now it is 75.2 grams.

Mine powers up at 9600 sending NMEA sentences.
« Last Edit: June 25, 2017, 02:32:38 am by jcg1541 »