[JiveFPV]

I understand that in order to use OneShot on CC3D, I can't use PWM inputs from a "standard" receiver. I have Spektrum so I can use the Spektrum satellite connected to the Main or Flex port. What I can not find anywhere is where do I connect my ESCs. Looking at the hardware diagram it makes it look like the servo pins, where I currently have my ESCs connected using PWM , is ONLY for PWM.

So where do I connect my ESCs when I get around to connecting my Satellite and enabling OneShot, do they still go on the servo output pins like I currently have it?

[f5soh]

Esc wiring still the same but outputs are configured differently and finally output a different signal. PWM, PWMSync, OneShot...
PWM input (for CC3D) is not compatible with Oneshot, not due to pins used but timers used internally for PWM decoding.