hamilc

  • *
  • 31
Connecting NAZA gps to revolution
« on: February 25, 2017, 11:09:29 pm »
I just received my NAZA gps. Two questions 1) what port does it plug into 2) The Naza came with a connector that won't plug into the revolution so I assume I have to do some rewiring or get some sort of adapter. In addition, there are no pin numbers or identification on the NAZA. What is the best way to proceed?

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Connecting NAZA gps to revolution
« Reply #1 on: February 25, 2017, 11:15:58 pm »
You can use all ports for GPS:
Flexi or Main port
or as alternative using two pins from Receiver port (pin7 and pin8)

You need to do a small adapter or solder wires with the new JST connector.

Take a look here:
https://librepilot.atlassian.net/wiki/display/LPDOC/GPS+setup#GPSsetup-NazaGPS

hamilc

  • *
  • 31
Re: Connecting NAZA gps to revolution
« Reply #2 on: February 26, 2017, 12:56:32 am »
That is what I wanted. Thanks