Re: graupner hott sumd
« Reply #15 on: December 19, 2015, 02:01:52 pm »
perfect
 thanks

Re: graupner hott sumd
« Reply #16 on: December 19, 2015, 02:56:51 pm »
I tried.
sumd-sumh set on FlexiPort or Mainport.
in both cases, just move a channel of the radio, the cc3d disconnects and restarts :'(

m_thread

  • *****
  • 87
  • GCS is my home
    • LibrePilot
Re: graupner hott sumd
« Reply #17 on: December 19, 2015, 03:46:02 pm »
Ok. I will have another look at the code to see if I can identify the cause of the crash. It will be hard for me to debug without the actual hardware. The only thing I can come to think of is a recording of serial output from the HoTT receiver. If I had that I could maybe replay the recording to see where it crashes.
/F

Re: graupner hott sumd
« Reply #18 on: December 19, 2015, 08:01:31 pm »
attached result of the terminal

Re: graupner hott sumd
« Reply #19 on: December 19, 2015, 08:12:07 pm »
same results with the atom.
just tested

m_thread

  • *****
  • 87
  • GCS is my home
    • LibrePilot
Re: graupner hott sumd
« Reply #20 on: December 20, 2015, 12:49:03 pm »
I have made a new build with some slight changes. I cant say I have found anything that I'm sure caused the board resets. I have found issues in the GCS though.
To test this please run the new GCS and then update ( and erase ) the firmware on the board.
Link to installer: https://www.dropbox.com/s/1ypt8qnvfxw5ktn/LibrePilot-15.09%2Br2-ge27f651-osx.dmg
Cheers
/F

m_thread

  • *****
  • 87
  • GCS is my home
    • LibrePilot
Re: graupner hott sumd
« Reply #21 on: December 20, 2015, 01:34:38 pm »
Ok, I did fix a thing found by another of the developers right now. Thanks Laurent...
Link to new installer will be uploaded in 30 mins.
/F

Re: graupner hott sumd
« Reply #22 on: December 20, 2015, 01:53:09 pm »
OK thanks.
in the meantime I have tried ...
same problem

m_thread

  • *****
  • 87
  • GCS is my home
    • LibrePilot
Re: graupner hott sumd
« Reply #23 on: December 20, 2015, 02:04:05 pm »
Great. Here is a new build: https://www.dropbox.com/s/umkxwxszt87i4yw/LibrePilot-15.09%2Br3-g7a95050-osx.dmg
I really hope this will work.
/F

Re: graupner hott sumd
« Reply #24 on: December 20, 2015, 07:41:08 pm »
Yes
start testing!
it works!
Now I check FlexiPort and Atom



demo video

f5soh

  • *****
  • 4572
    • LibrePilot
Re: graupner hott sumd
« Reply #25 on: December 20, 2015, 07:53:02 pm »
Great :)

If you can use the firmware attached and flash manually (rescue, load, flash), check the receiver stack in UavoBrowser and report the value after some time running.
Here in screenshot the receiver stack value is 100:



Thanks,
Laurent

Re: graupner hott sumd
« Reply #26 on: December 20, 2015, 08:45:20 pm »
Great :)

If you can use the firmware attached and flash manually (rescue, load, flash), check the receiver stack in UavoBrowser and report the value after some time running.
Here in screenshot the receiver stack value is 100:



Thanks,
Laurent

f5soh

  • *****
  • 4572
    • LibrePilot
Re: graupner hott sumd
« Reply #27 on: December 20, 2015, 08:52:09 pm »
Thanks Michele ;)

m_thread

  • *****
  • 87
  • GCS is my home
    • LibrePilot
Re: graupner hott sumd
« Reply #28 on: December 20, 2015, 09:32:13 pm »
This is awesome. Thanks Michele for the help with testing. Now I will clean up the code, add support for Revolution and Nano and create a Pull Request so that we can merge this functionality in to our next version.
I also want to thank TauLabs and especially ernieift for the implementation of the HoTT driver my code is based on.
If someone here could help out testing on Revo and Nano it would be great.
Cheers
/F

Re: graupner hott sumd
« Reply #29 on: December 20, 2015, 11:30:35 pm »
Tomorrow I try on FlexiPort, Atom and Nano atom