Librepilot won't work with reciever
« on: January 21, 2017, 08:25:09 pm »
When I am in librepilot, I can go throught most of the initial setup just fine until I get to "move all controls to maximum extents".

I move the sticks around on my reciever and nothing happens. Anybody have a solution for this?

I have an openpilot cc3d, with an fs ia6 reciever. The controller is a fs 16.

Max

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Librepilot won't work with reciever
« Reply #1 on: January 21, 2017, 08:35:08 pm »
Hi,
Some users expect the same behavior but we cannot reproduce.

Can you post the full config file you have while you are locked without stick moving in wizard ?
Go to File Menu > Help > Export UAV data...

Re: Librepilot won't work with reciever
« Reply #2 on: January 21, 2017, 08:59:46 pm »
Yes i have attached it, thank you for the quick response

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Librepilot won't work with reciever
« Reply #3 on: January 21, 2017, 09:02:18 pm »
Go to File Menu > Help > Export UAV data...

While the board is connected and running, just when the Tx wizard show the stick not moving.

Re: Librepilot won't work with reciever
« Reply #4 on: January 21, 2017, 09:08:19 pm »
That is what I sent

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Librepilot won't work with reciever
« Reply #5 on: January 21, 2017, 09:10:29 pm »
Sorry, you sent a normal config file.

Full config file generated using the Help > Export UAV data... will give a 60Kb file

Re: Librepilot won't work with reciever
« Reply #6 on: January 21, 2017, 09:13:51 pm »
oh now i see, here it is

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Librepilot won't work with reciever
« Reply #7 on: January 21, 2017, 09:32:40 pm »
Please try setting a flightmode in your radio and do not skip the FlightMode switch detection
« Last Edit: January 21, 2017, 09:36:15 pm by f5soh »

Re: Librepilot won't work with reciever
« Reply #8 on: January 21, 2017, 10:02:41 pm »
Yes that worked, I appreciate all your help