[Silentstorm360]

My Quadcopter is very stable until I try to move, it flips after trying to move forward, backward, left, or right but not when i yaw



Thanks For the Help!

[f5soh]

Hi, welcome.

Post your config file here:
File > Export UAV settings

[Silentstorm360]

i am very new to the hobby, I'm not sure what you mean

[f5soh]

Into the GCS, while the board is connected go to the Menu bar > File > Export UAV Settings and save the .uav file where you want.

Next step, attach the .uav file you saved to a post here.

[Silentstorm360]

Here

[f5soh]

I don't see something really wrong.
If you are a beginner you should expect a reactive quad because rates are set to 300deg/s

If you select the flightmode with Rate the quad can flip, but not if you use Attitude stabilization.

Just a note, all motors should be set using the same neutral if Esc are calibrated at same time.
You should start using "Text outputs" and adjust the neutral (where the motor just start spinning) for all motors (PROPS OFF !)

[Silentstorm360]

Ok, thanks!

[TheOtherCliff]

So were you aware that Rate mode does not return to level hover automatically?  You need Attitude mode for that.