Venom

  • *
  • 3
Selecting ESC version in the Vehicle Setup Wizard
« on: December 13, 2016, 01:23:46 pm »
Hi All,
Very new to Multi-Rotors
Bought a Lot containing lots of Multi-Rotor Items.. I have powered everything up and everything worked. One of the Multi-rotors in the lot has a Open Pilot CC3D board.
Using Libre Pilot I upgraded the firmware and started the Vehicle Setup Wizard. I get to where I have to pick the ESC type and I am not sure what to pick. The ESC's are the one part I have not been able to identify.
I am adding pictures here. Is there a way to identify them?

Thanks for any help.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Selecting ESC version in the Vehicle Setup Wizard
« Reply #1 on: December 13, 2016, 03:25:06 pm »
"Normal" esc should work selecting the rapid Esc button during Wizard.

Please add some insulation to Esc, the carbon frame is like a conductor and can cause sparks.

Venom

  • *
  • 3
Re: Selecting ESC version in the Vehicle Setup Wizard
« Reply #2 on: December 13, 2016, 03:49:59 pm »
I had just removed the Heat Shrink for the photos in hopes of identifying the brand and model number... thanks for your help. :)