librepilot rc2 speed indicator mwosd
« on: October 30, 2016, 03:22:06 pm »
Librepilot rc2 in combination with mwosd in taulabs configuration works except the speed indicator, always zero.

Is this functionality coming in another release of LP or do i miss a configuration option for gps ground speed?

Re: librepilot rc2 speed indicator mwosd
« Reply #1 on: November 08, 2016, 09:31:21 pm »
Need a bit more information since I am not using this...

Do you have a GPS installed and correctly configured?

Are you using Revo or CC3D for FC?

If using Revo, are you using INS13?

faigi

  • *
  • 9
Re: librepilot rc2 speed indicator mwosd
« Reply #2 on: April 07, 2017, 11:43:17 am »
Hi @all, i´m new here and have same problem. Using Revo FC with LP 16.09, connected an OP GPS on mainport and OSD on Flexi, so i have no free port for connecting an AUX MAG and when i switch to INS13, i get the MAG problem and problem with arming and so on, as dicussed a lot in other topics here. I tried to calibrate Revo´s MAG a lot of times and had no chance to solve this. Only Complementary works for having good flight performance. On the OSD 1.6 i´m able to see baro, GPS coordinates, how many satelites found, throttle % works all fine. Only Speed stays at 0km/h. When i connect a Laptop via onboard Oplink i saw on LP a speed of 27m/s for example, there i works....i don´t know why i can´t see speed on OSD. Can anybody help me?

Greetings faigi

f5soh

  • *****
  • 4059
    • LibrePilot
Re: librepilot rc2 speed indicator mwosd
« Reply #3 on: April 07, 2017, 08:13:34 pm »
Hi,

Can you try the firmware attached ?
No need config changes using 16.09 release.

Rescue, load firmware downloaded and Flash.

faigi

  • *
  • 9
Re: librepilot rc2 speed indicator mwosd
« Reply #4 on: April 08, 2017, 12:12:07 am »
Many thx, i'll test tomorrow and give you a Feedback...greetings faigi

faigi

  • *
  • 9
Re: librepilot rc2 speed indicator mwosd
« Reply #5 on: April 08, 2017, 12:16:20 am »
Only one short question, can you tell me whats different in this fw? Thx

faigi

  • *
  • 9
Re: librepilot rc2 speed indicator mwosd
« Reply #6 on: April 08, 2017, 08:45:15 am »
Hi, i just tested your file and yeah.....i can See speed values on my osd With INS13 mode.  Thank you so much! Please teĺl me whats different in this Version.  Many THX

f5soh

  • *****
  • 4059
    • LibrePilot
Re: librepilot rc2 speed indicator mwosd
« Reply #7 on: April 08, 2017, 10:29:27 am »
Here is the difference :
https://bitbucket.org/librepilot/librepilot/pull-requests/413

Other fix related to PID display / update D-Term issue is also included in this firmware.
https://bitbucket.org/librepilot/librepilot/pull-requests/373

faigi

  • *
  • 9
Re: librepilot rc2 speed indicator mwosd
« Reply #8 on: April 08, 2017, 11:21:42 am »
Many THX once more! Today in the afternoon i´ll test again in free flight aerea with more speed, the first test today was only in my garden with very low speed. I´ll test also other params during flights. If i have some news, i´ll post here.

THX

faigi

  • *
  • 9
Re: librepilot rc2 speed indicator mwosd
« Reply #9 on: April 09, 2017, 11:54:42 am »
I'm happy, speed works also in Complementary Basic mode, great THX

f5soh

  • *****
  • 4059
    • LibrePilot
Re: librepilot rc2 speed indicator mwosd
« Reply #10 on: April 09, 2017, 11:59:12 am »
Speed should only need reliable GPS data, nothing related to fusion algorithm.