est

  • *
  • 4
cc3d and my graupner mc20 and gr12
« on: September 17, 2016, 09:40:54 pm »
My first quad. I have a graupner mc20 hott. Having trouble wiring between cc3d an gr12. Can anybody help me With that?

f5soh

  • *****
  • 4572
    • LibrePilot
Re: cc3d and my graupner mc20 and gr12
« Reply #1 on: September 17, 2016, 09:55:29 pm »
Hi,

You can simply connect all wires needed to the GR12 receiver and select PWM input in hardware page.
Remember any change in Hardware page need a reboot (disconnect battery and USB)



https://librepilot.atlassian.net/wiki/display/LPDOC/CC+Hardware+Configuration#CCHardwareConfiguration-ReceiverPort


est

  • *
  • 4
Re: cc3d and my graupner mc20 and gr12
« Reply #2 on: September 17, 2016, 10:18:00 pm »
Thank you  :) Ok! Have tryed that but it didnt work. Will try again. Do you now how to use and wire ppn on hott tocc3d.

est

  • *
  • 4
Re: cc3d and my graupner mc20 and gr12
« Reply #3 on: September 17, 2016, 10:44:54 pm »
Wow Tanks :D