QC102

  • **
  • 84
On a CC3D the USB is located at the "Back" ie forward is the front - of the case/board. 
This makes it difficult to get at when a top deck is screwed down in place - so ...can I turn it 90degree's to get the USB on the side - and  change the  setting to show the new "forward". 

hwh

  • *
  • 1018
Re: The USB on CC3D board/case is hard to get at when fitted on a frame.
« Reply #1 on: June 12, 2016, 07:25:31 am »
Yes.  You can put it in almost any way, even upside down.

It's covered in the https://librepilot.atlassian.net/wiki/display/LPDOC/Attitude+Configuration wiki page.

QC102

  • **
  • 84
Re: The USB on CC3D board/case is hard to get at when fitted on a frame.
« Reply #2 on: June 15, 2016, 09:16:25 am »
Thanks for the link.... it will make life easier :)