Armed but motors wont spin.
« on: May 21, 2016, 10:58:58 pm »
Im using librepilot 15.09, and when the drone arms the motors wont move, when i move the sticks. Ive tried resetting the board, ugrading, ugrading and erasing and importing new UAV settings. The motors do spin when i go through the vehicle settup wizard, so its not a hardware.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Armed but motors wont spin.
« Reply #1 on: May 21, 2016, 11:11:52 pm »
What esc do you use ?

The min value should be 1000 for all motors in Output tab.

Re: Armed but motors wont spin.
« Reply #2 on: May 22, 2016, 12:27:18 am »
15 amp esc. 3s batteries, and 2204-2300kv motors

Re: Armed but motors wont spin.
« Reply #3 on: August 06, 2016, 06:21:46 am »
Did you find a solution for this?  I'm running into the same problem.