Hubson X4107D FPV and Fatshark Dominator V3
« on: March 31, 2016, 02:14:41 am »
Well this was supposed to be easy, and I am not finding to be so.
If I use the Hubson to learn accidents will be less costly and I can fly more.

Goggles Fatshark Dominator V3
Receiver Fatshark Dominator 5.8 GHz Module
Antenna both the standard antenna that ships with the receiver
ImmersionRC spiroNET Circular polorized Antenna.

I found articles where people connected the Fatshark V2 to the Hubson X4 and they used the radio to do it.

I have tried 3 of the 4 bands FS/IRC, RaceBand, Boscam A, and most of the frequencies in the list.

Process  I power on goggles, power on the drone, power on the radio.

Pick open the menu on the radio and pick a frequency  that matches both sides.

from the goggles I scroll through the 8 channels and i never get anything.

is there something I am missing on binding this?

is there a way to make a cable from the radio to the goggles.

the Hubson goggles are and option at 120 not that expensive other than the reviews trash them and suggest you try other goggles.


  • ***
  • 129
Re: Hubson X4107D FPV and Fatshark Dominator V3
« Reply #1 on: March 31, 2016, 04:32:17 am »
Not trying to blow you off but you're reeeeeaally gonna get muuuuch better information from a hubsan- or fatshark-specific forum.