[kennyevo]

Added 2303 firmware version that should work with current next
https://librepilot.atlassian.net/wiki/display/LPDOC/MinOPOSD+setup#MinOPOSDsetup-Downloadsdownloads

You need to do a "git pull" and rebuild next

Cool, will check it tonight!

Still the same :S
It says disarmed even if the quad is armed, can't change panels with flicking the switch, if I keep the switch down I see the panels changing but it goes back to panel 1 as soon as I put the switch back to it's original position :/

[f5soh]

and are they more current than "minOPOSD_15_02_AnalogRSSI.hex" (I cant remember where I sourced this HEX it's been so long)

the 1502 is not compatible with LP15.09

The last two files tagged with next are from today and should be compatible with current dev branch (or next release if you want)

Still the same :S
It says disarmed even if the quad is armed, can't change panels with flicking the switch,

Did you updated the next branch ?
Rebuild firmware and reflashed your board ?

[pyr8]

the 1502 is not compatible with LP15.09

I am using the default Open Pilot firmware that came loaded on my CC3D from HobbyKing. Will the "LP_MicroKvteam_CC3D_analog_inputs2810.hex" work?

[f5soh]

If you still use the OP15.02 release in your board, why you want to update the OSD firmware ?

[kennyevo]

Still the same :S
It says disarmed even if the quad is armed, can't change panels with flicking the switch,

Did you updated the next branch ?
Rebuild firmware and reflashed your board ?

Yep, rebuilt then updated the firmware, loaded the hex onto the minimosd, and still the same :/
The strange thing is that the artifical horizon is good, throttle is good, velocity, pitch/roll good, but nothing else. Flight mode is always MAN, always disarmed and battery low :/

[pyr8]

If you still use the OP15.02 release in your board, why you want to update the OSD firmware ?

I want to have the most current 'stable' firmware version.

[f5soh]

if you still with OP15.02; no need update, really.

The strange thing is that the artifical horizon is good, throttle is good, velocity, pitch/roll good, but nothing else. Flight mode is always MAN, always disarmed and battery low :/

That really strange, just tested again all file here without issues.

Set battery alarm level to 0, that disable Batt alarm
Since one alarm still (like disarmed) you cannot switch between panels.

What number do you see on top of GCS windows  ? GCS15.09+r505 ?

[kennyevo]

Damn, I was tired, launched the 15.09 instead of the next gcs

Okay, progress, now the battery voltage and current are correct on the osd, the disarmed warning disappears when I arm the quad, but the battery low warning is still there even if the tresholds are set to 0 :/(edit: set the treshold in gcs instead of the osd config)

Also still can't change panels with a simple switch and rotation enabled. (edit: without the rotation option I have panel 1 and empty panel, not panel 1 and panel 2)

[kennyevo]

Okay, used a 4 position switch instead of a two, now I have all the free states (panel1-2 and empty)
I see that the osd doesn't fit on my screen so I have to move the elements closer to the center :/

I think all my problems are solved now

[f5soh]

Good news