[f5soh]

Hi No config, very pleased to see you here.

Try manual update:
- Disconnect board
- Hit Upgrade&Ěrase button
- Connect board
- Wait one minute

Be sure there is only one board connected to computer, just in case...

Describe led behavior after you power the board.

[no config]

@ cato
Once again, the light is steady green and slow flashing blue.
i already said that. Please i have been at this for a long time now and I really have no more patience and would love to tell you guys anything if it will help me, I am not playing games or holding anything back.  Does it sound like I am trying to beat around the bush and play games!??.  If you want to know something ask me a direct question,
Yes green light, yes blue blinking light, yes reinstalled drivers, no change, no communication with board and computer even though it "says" connected.

[f5soh]

If you want to know something ask me a direct question,

Sure, same question:

Code: [Select]

Describe led behavior after you power the board.

Once again, the light is steady green and slow flashing blue.

I'm asking the led behavior, so board go directly to slow blinking just after you power board ?
The green led refers only to power.

[no config]

What part of 1-green led and 1-slow blinking blu do you not understand.
Why are you playing freaking games and ask me the same questions ovr and over when i have told you every tiem

YES- SOLID GREEN LED
YES- SLOW BLINKING BLUE

DO YOU UNDERSTAND THE WORDS ABOVE??

[f5soh]

So, no rapid blue led flashing at some point ?
How are the Tx/Rx bars while the board is connected ?

Calm down please, you are here since half a day and already typing with CAPSLOCKS... not really nice from your side.
We are not playing games here.

[no config]

this is way too much work to put into a $20 board.

[f5soh]

Too much work ? for ?

Look your Gcs / board and answer the two questions above ?

[mr_w]

$20? You have overpaid it. You did not do enough research. It is actually $10 board. With case included.

Are you sure it is actually CC3D?

[no config]

LMFAO! I give up!

[f5soh]

LMFAO! I give up!

So close to answer

Code: [Select]

So, no rapid blue led flashing at some point ?
How are the Tx/Rx bars while the board is connected ?

[no config]

the blue light does blink fast for a second then goes steady slow blink.
The tx/rx bars move around at first then settles to one green bar on tx, and 0 on rx, weird.

[f5soh]

Good, so your board looks working fine.

Go to https://librepilot.atlassian.net/wiki/display/LPDOC/Troubleshooting
And uninstall driver, follow steps but at some point some users need a reboot.

Try another computer to be sure is a driver issue.

[no config]

yes, i have already went to that link fSsoh, and new drivers did not help, same thing.

[f5soh]

Try again and test with another computer.

[no config]

tried with my laptop, same thing. 
both are running windows 7