f5soh

  • *****
  • 4476
    • LibrePilot
Re: Altitude GPS
« Reply #15 on: March 21, 2016, 04:25:55 pm »
Here is a video that show how to setup a I2C auxmag, you just need to select "Naza GPS" on Wizard and the rest is valid.

In french :)

Re: Altitude GPS
« Reply #16 on: March 21, 2016, 05:38:52 pm »
Dear,
Thank a lot for this video but I need to disable a internal magnetometer (Revolution). When I select Mag usage : AuxOnly
The software send me a warming for a big difference between both magnetometer.

f5soh

  • *****
  • 4476
    • LibrePilot
Re: Altitude GPS
« Reply #17 on: March 21, 2016, 06:03:52 pm »
The onboard magnetometer is used as reference for Auxmag orientation setup.

If you select "AuxOnly", the only mag used for navigation/ins13 is external

Revolution don't exist, except for Chinese cloners.
CC3D and Revolution refers to two different boards.

Re: Altitude GPS
« Reply #18 on: March 22, 2016, 09:37:22 am »
OKay for this informations.
I need to modify firmware because I really need to use a external magnetometor in all mode.
Thank you
Best Regards

f5soh

  • *****
  • 4476
    • LibrePilot
Re: Altitude GPS
« Reply #19 on: March 22, 2016, 11:59:46 am »
Why you want to modify ?
What do you mean with all modes ?

Re: Altitude GPS
« Reply #20 on: March 23, 2016, 09:15:38 pm »
I would like control the position of UAV. I have create my own gps. I think it's more accuary (somes centimeters) than the orignal gps. I use a same protocol that DJI GPS and compass.
My first goal is a create a simple flight with a flight stationary with my own "GPS".

f5soh

  • *****
  • 4476
    • LibrePilot
Re: Altitude GPS
« Reply #21 on: March 23, 2016, 09:26:26 pm »
No need to modify, the naza Gps is already supported with his magnetometer.


Re: Altitude GPS
« Reply #22 on: March 25, 2016, 10:47:16 am »
okay, then ihave a big problem because when i connect a real dji gps, the card don't use it. When i move the dji gps, yaw keep the same value and if i move a autopilot this value change.
I will start a new setup.

f5soh

  • *****
  • 4476
    • LibrePilot
Re: Altitude GPS
« Reply #23 on: March 25, 2016, 04:09:21 pm »
Do you set a fusion algorithm that works with Mag ? Ins13Indoor for example.
Move the mouse over "source invalid", if i remember there is a tooltip.

Look video i posted above, how are the two mag alarms in Attitude > Magnetometer tab ?