[nabreu]

Hi!

Is it possible to set a way so that the throtle automaticly drops to a certain amount according to the quadcopter rotation or stick input ?

The objective is to not have the need to manually reduce throtle when doing 3D with a quadcopter with fast flips or rolls, and having the controller doing it for you. Something like, if at full or above 90% stick input (Roll or Pitch) the throtle automaticly drops to about 10%

Is it possible ?

[aa8mc]

I don't fly sport and am just getting my wings under me but it's my understanding that this is exactly what the cruise control throttle setting in the flight modes tab does.

[nabreu]

Well, probably but Cruise Control only works with attitude mode. I was holping to use acro+ that is best for 3D / Sport

[aa8mc]

Have you tried Rattitude?

[Mr.Twisty]

As far as I know cruise control can be used in rate mode

[TheOtherCliff]

Acro+ had an issue with Cruise Control when it first came out, but that has been fixed.  Rate was also disallowed when Acro+ problem was found.  Since then it is my understanding that it all works, and Cruise Control works on Rate, Attitude, Rattitude, Acro+

By default settings, CruiseControl reduces motor to 5% when you go past 90 degree bank (past 105 degree actually).

[Muskoka]

I'm running 15.09 and can't use cruise control with acro plus. On the flight data screen you get a red config and question mark stating "One  stabilized mode use a wrong thrust mode, like CruizeControl with Rate on Pitch/Roll".

The only modes I use are rattitude and acro+.

When I change the trust back to manual in acro+ the red errors are gone, and config is green again.

[nabreu]

Yes. That's happening to me also. Is there a workaround ?

[Muskoka]

Yes. That's happening to me also. Is there a workaround ?

I don't know of any workaround, was hoping one of the developers would post something about this.