« previous next »
Pages: [1]
*

jdl

  • ***
  • 246
Analog Airspeed is not functional in Next.589
« on: March 10, 2018, 12:04:29 am »
Today I noticed that Analog Airspeed Sensor functionality is broken in current next. Revo board, MPXV7002 sensor on output port #5 (ADCRouting: [adc4]). No errors or alarms but sensor values are nonsense and do not reflect the output voltage from the sensor. Disconnecting the sensor doesnot affect displayed raw values, too.

The sensor and Revo board are ok, I switched back to 16.09 to confirm they are functional.

Can someone test and confirm this issue?

Here is the UAV file for the wing, for firmware next.589:


Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Analog Airspeed is not functional in Next.589
« Reply #1 on: March 10, 2018, 12:46:00 pm »
Seems there is indeed issues with ADC inputs when using servo pins, thanks for report.
Logged
*

jdl

  • ***
  • 246
Re: Analog Airspeed is not functional in Next.589
« Reply #2 on: March 10, 2018, 09:49:38 pm »
Thanks, f5soh!
Is there a chance to get a fixed Revo firmware only for next.589, when and if available?
Logged
*

mr_w

  • *
  • 207
    • LibrePilot
Re: Analog Airspeed is not functional in Next.589
« Reply #3 on: March 11, 2018, 12:52:16 am »
Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Analog Airspeed is not functional in Next.589
« Reply #4 on: March 11, 2018, 01:09:52 am »
Or flash the firmware attached with r589
Logged
*

jdl

  • ***
  • 246
Re: Analog Airspeed is not functional in Next.589
« Reply #5 on: March 11, 2018, 10:09:07 am »
I'm currently away from home, I will upload and test fixed firmware later this evening and report back. Thanks!
Logged
*

jdl

  • ***
  • 246
Re: Analog Airspeed is not functional in Next.589
« Reply #6 on: March 12, 2018, 01:00:47 pm »
I report tests with this firmware were completely successful, either on desk or real flight ones. Thanks for lightning fast support!
Logged
Pages: [1]
« previous next »